TK,TK-T Super Precision Air Chucks
1.Pre-machined tapped holes and lubrication path: There are tapped holes for fixing jigs, thus, additional screw machining is not necessary, and pre-machined lubrication path can connect to auto-lubrication unit to lubricate the chuck automatically.
2.Built:in cyinder: Connect cylinder directty to the chuck for stabl gripping
3.Precise soft jaw positioning:It's easy to remount soft jaw to the correct position with dowel pins on it
4. High gripping precision brings better quality and effciency:Good coaxiality and repeatability of gripping are able to achieve the accuracy of “μ degree " machining processes can be simplified or shortened to make high precision machining with high efficiency come ture .
| MODEL /SPEC. | A | B | C | D | E | D1 | d (H7) | D2 | H | h | W | M1 | |
| TK-04 | 20.75 | 12.7 | 12.7 | 101.6 | 30 | 82.55 | 18 | 25 | 70.3 | 3.2 | 16 | 6-M5x0.8P(PCDφ88.9) | |
| TK-06 | 39.75 | 12.7 | 12.7 | 152.4 | 40 | 124.97 | 26 | 34.5 | 70.3 | 3.2 | 22 | 6-M6x1P(PCDφ135.89) | |
| TK-08 | 65.75 | 25.4 | — | 203.2 | 45 | 167.64 | 50 | 50 | 50 | 7 | 25 | 6-M10x1.5P(PCDφ182.88) | |
| TK-04T | 20.75 | 12.7 | 12.7 | 101.6 | 30 | 82.55 | 18 | 25 | 25 | 3.2 | 16 | 6-M5x0.8P(PCDφ88.9) | |
| TK-06T | 39.75 | 12.7 | 12.7 | 152.4 | 40 | 124.97 | 26 | 34.5 | 34.5 | 3.2 | 22 | 6-M6x1P(PCDφ135.89) | |
| TK-08T | 65.75 | 25.4 | — | 203.2 | 45 | 167.64 | 50 | 50 | 50 | 7 | 25 | 6-M10x1.5P(PCDφ182.88) | |
| MODEL /SPEC. | M2 | M3 | T1 | T2 | T3 | R1 | |||||||
| TK-04 | 6-M5X0.8P | 9-φ3.18 | 3-M5x0.8P(PCDφ88.9) | ― | ― | 30° | |||||||
| TK-06 | 12-M5X0.8P | 9-φ3.18 | 3-M6x1P(PCDφ135.89) | 3-M6x1P(PCDφ110) | 3-M6x1P(PCDφ135.89) | 30° | |||||||
| TK-08 | 6-M10X1.5P | 6-φ6.36 | 3-M8X1.25P(PCDφ182.88) | 3-M8x1.25P(PCDφ150) | 3-M8x1.25P(PCDφ100) | 30° | |||||||
| TK-04T | 4-M5X0.8P | 6-φ3.18 | 2-M5x0.8P(PCDφ70) | — | — | — | |||||||
| TK-06T | 8-M5X0.8P | 6-φ3.18 | 2-M6x1P(PCDφ110) | — | — | — | |||||||
| TK-08T | 4-M10X1.5P | 4-φ6.36 | 2-M8x1.25P(PCDφ150) | — | — | — | |||||||
| MODEL /SPEC. | R2 | R3 | Jaw Stroke [Diameter] (mm) | Gripping Force At Air Pressure 7 kgf/cm2 (0.7MPa) kgf (kN) | Max.Speed r.p.m.(min⁻¹) | Weight (kg) | |||||||
| TK-04 | — | — | 3 | 800 | (7.8) | 4500 | 4.4 | ||||||
| TK-06 | 30° | 75° | 3 | 1200 | (11.7) | 4200 | 9.8 | ||||||
| TK-08 | 30° | 30° | 3 | 1800 | (17.6) | 2500 | 26.3 | ||||||
| TK-04T | — | — | 3 | 800 | (7.8) | 3500 | 4.2 | ||||||
| TK-06T | — | — | 3 | 1200 | (11.7) | 3500 | 9.5 | ||||||
| TK-08T | — | — | 3 | 1800 | (17.6) | 2000 | 25.1 | ||||||
★ Reserve the right to modify spcifications
Related to recommend
